Mid Production Slitting Line, MAX 600 SL type
This is an optimised Slitting Line with a modular
basic design on which can add and fit options for increasing
production capacity and performance characteristics of the Line,
according customer's specifications and requirements.
This modular design is applied so for mechanical components as for
electronics because an integrated "in house" construction,
made inside INDECO's plant.
All control systems are manufactured with elec. standard
components, available in the market permitting an easy
replacement for maintenance services anywhere at anytime.
The main advantage of this "MAX" type modular design for the customer
is a present low investment, for a High Quality and
Performance Line and a future step by step development according production
requirements.
Line Production Parameters for a Slitting Line MAX 600
SL type:
-
Type of material to be processed:
- Carbon steel, Stainless Steel, Aluminium, Non
ferrous metals and alloys.
- Cold and hot rolled, pickled, dry or oiled,
galvanized and coatings.
Mechanical characteristics:
|
Min. |
Max. |
Material strength |
N/mm² |
350 |
600 |
Yield point |
N/mm² |
280 |
350 |
Strip width |
mm. |
- |
600 |
Strip thickness |
mm. |
0,3 |
4 |
Coil O.D. |
mm. |
508 |
610 |
Coil weight |
Tn.. |
- |
8 |
Slitting line general specifications:
Processing speeds:
Strip Threading speed |
- |
mts/min. |
15 |
Line Speed |
N¹ 1 |
mts/min. |
0-120 |
Tensioning units (Unwind/Recoiling):
Strip width max. mm |
Line speed mts/min. |
Tension in Kg. |
Unwind |
Recoiling |
600 x 4 |
120 |
360 |
2000 |
Line Design:
Metal Strip Width (mm) |
Line speed mts/min. |
Line type |
600 x 4 |
120 |
One loop |
Board of Production:
Material: σ R = 600 N/mm²
Thickness |
mm. |
0,3 |
0,5 |
0,8 |
1 |
1,5 |
2 |
2,5 |
3 |
4 |
Nº of Strips |
Nº |
30 |
24 |
20 |
18 |
12 |
10 |
8 |
6 |
3 |
Production speed |
mts/min. |
120 |
120 |
Recoiling specifications:
|
|
Min. |
Max. |
Range of strip widths |
mm. |
20 |
600 |
Range of strip thikness |
mm. |
0,3 |
4 |
Range of coils O.D. |
mm. |
- |
1850 |
Coils I.D. |
mm. |
- |
508 |
Coils weight |
Tm. |
- |
8 |
Future options:
- Unwind coil car
- Scrap shearing
- Increase line speed up to 240 m/min
- Fully automatic slitter change
Electric Parameters:
|
10% |
5% |
Power Elec. current |
380 V. |
50 Hz. |
Auxiliary Elec. current |
110 V. |
50 Hz. |
Solenoid valves Elec. current |
110 V. |
50 Hz. |
Compressed air
Hydraulic power pack
nominal pressure |
100 bars. |
Max. pressure |
110 bars. |
Cooling system by |
Air |
Climatic condition
|
Min. |
Max. |
Outdoor temperature |
-6º C |
+44º C |
Indoor temperature |
+5º C |
+40º C |