• Cut-to-length lines
• Slitting lines

  High Production Slitting Line, HPS type

  Mid Production Slitting Line, MAX 600 SL type

  Mid Production Slitting Line, MAX 1500 SL type

  Slitting shear systems

  Braking and Tension units

  Recoilers

  Hydraulic Recoiler

  Recoiler with rolling clamp threading system

  Scrap baler

  Coil removal car station

• Packaging and stacking lines
• Special machines
• Press felts
• Automation systems
• Supplies

Recoiler with rolling clamp threading system

Machine Description

The rewinding system is designed to achieve evenly wound coils with uniform tension and allowing additional roll banding and removing the slit coils without delay.

The machine is composed by:

• Main body frame is carbon steel fabricated and tension relief.
• Hydraulically expanded multi-wedge hardened recoiler drum incorporate a integral gripper system and is supported on high precision bearings.
• Automatic threading system with roller clamp and articulated hinge arm.
• Mechanical drive with helical gear box for recoiler drum.
• Coils ejector plate hydraulically operated.

Main characteristics of a representative machine:

Operation sequences:
	Description: -The fonction of this threading system is to wrap the metal strip on the mandrel of recoiler without holding and bending the metal strip end in between of mandrel jaws. -The rolling clamp is wrapping gently the metal strip on the mandrel preventing marks or notches on the sensitive metal surfaces. - The main application of this system is for recoiling high quality sensitive metals such aluminium, stainless steel, coatings, etc. and more than that when the quantity of coils is very high and the diameter of them is small. -The system is very performant for service centers with high production of small diameter coils.
	General technical data: Strip width: 500 a 2100 mm. Strip thickness: 0,1 a 3 mm. Metal types: Aluminium, stainless steel, coatings and brass.